Wiki source code of CSAT3
Version 2.2 by Wei-Ren Ng on 2023/11/15 10:19
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | CSAT3 control box has been modified with an RS232 to RS422 transceiver to allow for a longer transmission line at 19.2 kbps | ||
| 2 | Using USConverters.com device, however, any comparable converter should work. | ||
| 3 | |||
| 4 | The CSAT3 has to be configured in the Unprompted mode. | ||
| 5 | |||
| 6 | CSAT3 is set to the following configuration with the corresponding commands: | ||
| 7 | rs 1 - AA55 synchronization code | ||
| 8 | br 1 - Baud rate 19.2 kbps | ||
| 9 | ri 1 - RTS independent | ||
| 10 | & - Unprompted mode | ||
| 11 | Ae - 60 Hz Execution Parameter/Acquisition rate. | ||
| 12 | |||
| 13 | Settings are saved to EEPROM by the 'sr2718' command. | ||
| 14 | *Do note that a hardware jumper needs to be set in the electronics box. Refer to manual for details. | ||
| 15 | |||
| 16 |