Changes for page CSAT3
Last modified by Wei-Ren Ng on 2023/12/13 08:15
Change comment:
There is no comment for this version
Summary
Details
- Page properties
-
- Author
-
... ... @@ -1,1 +1,1 @@ 1 -XWiki. msibayan1 +XWiki.weiren - Content
-
... ... @@ -1,11 +1,16 @@ 1 1 CSAT3 control box has been modified with an RS232 to RS422 transceiver to allow for a longer transmission line at 19.2 kbps 2 2 Using USConverters.com device, however, any comparable converter should work. 3 3 4 -CSAT3 is set to: 4 +The CSAT3 has to be configured in the Unprompted mode. 5 + 6 +CSAT3 is set to the following configuration with the corresponding commands: 5 5 rs 1 - AA55 synchronization code 6 -br 1 - Baud rate 19.2 kbps 8 +br 1 - Baud rate 19.2 kbps 7 7 ri 1 - RTS independent 10 +& - Unprompted mode 11 +Ae - 60 Hz Execution Parameter/Acquisition rate. 8 8 9 -Settings are saved to EEPROM 13 +Settings are saved to EEPROM by the 'sr2718' command. 14 +*Do note that a hardware jumper needs to be set in the electronics box. Refer to manual for details. 10 10 11 - Outputdata rate set to 60 Hz16 +
- csat3.pdf
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.weiren - Size
-
... ... @@ -1,0 +1,1 @@ 1 +3.6 MB - Content