<
From version < 2.1 >
edited by Wei-Ren Ng
on 2023/11/15 10:10
To version < 3.1 >
edited by Wei-Ren Ng
on 2023/11/15 10:27
>
Change comment: There is no comment for this version

Summary

Details

Icon Page properties
Content
... ... @@ -1,11 +1,16 @@
1 1  CSAT3 control box has been modified with an RS232 to RS422 transceiver to allow for a longer transmission line at 19.2 kbps
2 2  Using USConverters.com device, however, any comparable converter should work.
3 3  
4 -CSAT3 is set to:
4 +The CSAT3 has to be configured in the Unprompted mode.
5 +
6 +CSAT3 is set to the following configuration with the corresponding commands:
5 5  rs 1 - AA55 synchronization code
6 -br 1 - Baud rate 19.2 kbps
8 +br 1 - Baud rate 19.2 kbps
7 7  ri 1 - RTS independent
10 +& - Unprompted mode
11 +Ae - 60 Hz Execution Parameter/Acquisition rate.
8 8  
9 -Settings are saved to EEPROM
13 +Settings are saved to EEPROM by the 'sr2718' command. 
14 +*Do note that a hardware jumper needs to be set in the electronics box. Refer to manual for details.
10 10  
11 -Output data rate set to 60 Hz
16 +
This wiki is licensed under a Creative Commons 2.0 license
XWiki Enterprise 13.10.5 - Documentation