Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,16 +1,11 @@
1	1	CSAT3 control box has been modified with an RS232 to RS422 transceiver to allow for a longer transmission line at 19.2 kbps
2	2	Using USConverters.com device, however, any comparable converter should work.
3	3
4		-The CSAT3 has to be configured in the Unprompted mode.
5		-
6		-CSAT3 is set to the following configuration with the corresponding commands:
	4	+CSAT3 is set to:
7	7	rs 1 - AA55 synchronization code
8		-br 1 - Baud rate 19.2 kbps
	6	+br 1 - Baud rate 19.2 kbps
9	9	ri 1 - RTS independent
10		-& - Unprompted mode
11		-Ae - 60 Hz Execution Parameter/Acquisition rate.
12	12
13		-Settings are saved to EEPROM by the 'sr2718' command.
14		-*Do note that a hardware jumper needs to be set in the electronics box. Refer to manual for details.
	9	+Settings are saved to EEPROM
15	15
16		-
	11	+Output data rate set to 60 Hz