Changes for page CSAT3
Last modified by Wei-Ren Ng on 2023/12/13 08:15
Change comment:
Uploaded new attachment "csat3.pdf", version 1.1
Summary
Details
- Page properties
-
- Content
-
... ... @@ -1,16 +1,11 @@ 1 1 CSAT3 control box has been modified with an RS232 to RS422 transceiver to allow for a longer transmission line at 19.2 kbps 2 2 Using USConverters.com device, however, any comparable converter should work. 3 3 4 -The CSAT3 has to be configured in the Unprompted mode. 5 - 6 -CSAT3 is set to the following configuration with the corresponding commands: 4 +CSAT3 is set to: 7 7 rs 1 - AA55 synchronization code 8 -br 1 - Baud rate 19.2 kbps 6 +br 1 - Baud rate 19.2 kbps 9 9 ri 1 - RTS independent 10 -& - Unprompted mode 11 -Ae - 60 Hz Execution Parameter/Acquisition rate. 12 12 13 -Settings are saved to EEPROM by the 'sr2718' command. 14 -*Do note that a hardware jumper needs to be set in the electronics box. Refer to manual for details. 9 +Settings are saved to EEPROM 15 15 16 - EOLbyCampbellSci isDecember2026.11 +Output data rate set to 60 Hz