Wiki source code of CSAT3

Version 2.2 by Wei-Ren Ng on 2023/11/15 10:19

version	line-number	content
1.1	1	CSAT3 control box has been modified with an RS232 to RS422 transceiver to allow for a longer transmission line at 19.2 kbps
	2	Using USConverters.com device, however, any comparable converter should work.
	3
2.2	4	The CSAT3 has to be configured in the Unprompted mode.
	5
	6	CSAT3 is set to the following configuration with the corresponding commands:
1.1	7	rs 1 - AA55 synchronization code
2.2	8	br 1 - Baud rate 19.2 kbps
1.1	9	ri 1 - RTS independent
2.2	10	& - Unprompted mode
	11	Ae - 60 Hz Execution Parameter/Acquisition rate.
1.1	12
2.2	13	Settings are saved to EEPROM by the 'sr2718' command.
	14	*Do note that a hardware jumper needs to be set in the electronics box. Refer to manual for details.
1.1	15
2.2	16