Wiki source code of CSAT3

Version 3.1 by Wei-Ren Ng on 2023/11/15 10:27

author	version	line-number	content
		1	CSAT3 control box has been modified with an RS232 to RS422 transceiver to allow for a longer transmission line at 19.2 kbps
		2	Using USConverters.com device, however, any comparable converter should work.
		3
		4	The CSAT3 has to be configured in the Unprompted mode.
		5
		6	CSAT3 is set to the following configuration with the corresponding commands:
		7	rs 1 - AA55 synchronization code
		8	br 1 - Baud rate 19.2 kbps
		9	ri 1 - RTS independent
		10	& - Unprompted mode
		11	Ae - 60 Hz Execution Parameter/Acquisition rate.
		12
		13	Settings are saved to EEPROM by the 'sr2718' command.
		14	*Do note that a hardware jumper needs to be set in the electronics box. Refer to manual for details.
		15
		16