Wiki source code of cRIO-TRF-P01

Last modified by Michael Sibayan on 2022/05/03 16:48

author	version	line-number	content
		1	[[image:cRIO-TRF-P01.jpg]]
		2
		3	__Module 1 (NI-9401)__
		4	* 8 channel digital I/O set up as a pulse counter.
		5	* Used to monitor pulses from anemometers
		6	* Terminal block in the upper right provides power (through a resistor) to the anemometers.
		7
		8
		9	__Module 3 (NI-9205)__
		10	* 16/32 channel +/-10V analog input
		11	* First 16 channels set up in +/-1V differential mode for the pyranometers and quantum sensors
		12	* Last 16 channels set up in +/-5V referenced single ended mode for the HMP45 temp/RH sensors
		13	* Common is tied to the 12VDC power supply negative terminal (for RSE channels)
		14
		15	__Module 5 (NI-9213)__
		16	* 16 channel +/- 75mV differential analog input
		17	* First four channels measure light sensor signals
		18	* Channel 5 measures voltage of the PT100 thermistor
		19	* Common is tied to the shields and the 12VDC power supply negative terminal (for PT100)
		20
		21
		22	__0.5mA current source__
		23	* Provides approximately constant 0.5mA current for the PT-100 thermistor
		24	* 0.5mA chosen to put the signal voltage within range of the NI-9213 AI module (approximately 50mV)
		25
		26
		27	__Anemometer terminal block__
		28	* Provides 5VDC, through a resistor, to the anemometers
		29	* 5V chosen to match the TTL level of the NI-9401 DIO module